TL-X ITALO
- Funções principais
- Características chave
- Technical warnings
- Push button with proximity sensor (Laser technology)
- Activation distance: up to 3 cm
- Body: stainless steel and nylon
- Bezel: deep drawn bezel in stainless steel AISI 304 (gold pvd coated is an optional)
- Front side: polycarbonate with illuminable legend
- Mounting: the push button is put into the cutout (32,5x32,5mm) and fixed by a snap fitting
- Faceplate thickness: 0,7 mm to 3 mm
-
Illuminations: double colour white/red –double colour red/ blue
-
Degree of protection: IP51
-
Power supply: 8 V DC -30 V DC
BRAILLE Solutions:
- TL-X with BRAILLE
- Optional plateTAG SQUARE
- Optional plate TAG SLIM
WARNING GROUNDING SYSTEM
In case of installation of the device on a metal fixture, it is strongly recommended to connect the fixture to the grounding system, to avoid malfunction or damage to the electronic device installation.
WARNINGS FOR CLEANINGS
Our push buttons must be cleaned only and exclusively with a COTTON RUG and WARM WATER. Avoid every use of chemical substances, above all for plastic surfaces.
Most of Vega products are made in polycarbonate, ABS, methacrylate or Nylon 66. The use of many cleaning products with caustic soda, hydrocarbons, hydrochloric acid, nitric acid, acetic acid, ethyl alcohol and methyl alcohol are strictly prohibited.